Invacare® MK6i™ Electronics
LCD DISPLAY
PERFORMANCE ADJUSTMENT DESCRIPTION
MOM REVERSE
>
MOM
LTCH
Allows Reverse to be set as either MOMENTARY or LATCHED.
•
Allows Reverse to be set as either MOMENTARY or LATCHED.
•
On sets reverse as momentary, Off sets reverse in Latched.
•
Helpful for some sip-n-puff users backing into spaces.
DIGITAL 3 SPEED
> 3 SPEEDS
1 SPEED
Allows either 1 or 3 driving speeds for Digital Controls in Momentary Mode (Previously
named “Momentary Mode Select”)
•
1 SPEED provides only one forward speed.
•
3 SPEEDS provides 3 forward speeds, (1/3, 2/3, or full programmed speed), selected
with a mode (re-set) switch prior to driving.
•
“3 SPEEDS” provides speed selections using digital driver controls - without
changing drives.
•
Present only when digital driver control is selected under Input Type.
SLEEP MODE
>
ON
OFF
Allows the Wheelchair to enter an “Inactive (resting) Mode” mode after a set period of
time with no driver control activity. (Previously named StandBy Mode)
•
Used with drivers who cannot access the On/Off switch during periods of no activity.
•
When chair enters sleep mode, a mode switch (Reset) is required to return the
wheelchair to operating mode.
•
Disappears from the menu if Standby Select is On.
STBY SEL
>
ON
OFF
Sends the wheelchair into resting mode. Driver commands then SELECT next operating
function – BYPASSING the “Reset Switch”. Once in Standby mode:
•
FORWARD command ALWAYS returns the wheelchair back to Drive Mode.
•
RIGHT Command = Remote Drive Select Mode (if turned on). Subsequent Left
command changes to next drive.
•
LEFT Command = ECU functions, then Powered Seating Functions (if turned on).
•
Disappears from the menu if Sleep Mode is On.
50
1141471-L-00