LCD DISPLAY
PERFORMANCE ADJUSTMENT DESCRIPTION
DCI MONITORING
(SPJ+ ONLY)
IVC MANUAL SEATING
(OR “CONTINUOUS”)
IVC POWER SEATING
(OR “LATCHING”)
Determines the method Drive Lock Out status is monitored by the controller.
CONTINUOUS/IVC MANUAL SEATING
•
Status of the drive lockout switch is continuously monitored for change.
•
Use this setting for manual tilt or recline systems.
•
Recommended for some aftermarket powered seating systems. Consult the
aftermarket seating manufacturer for more information.
LATCHING/IVC POWER SEATING
•
Monitors the Drive Lockout Input switch ONLY during power up, and after
actuator operation.
•
This setting is recommended for Invacare powered seating systems.
ACC 1 (2)
(SPJ+ ONLY)
OFF
ON
Allows setting actuator to operate through the SPJ+ with ACC Joysticks when ACC is
used on the TDX Spree Power Wheelchair with power tilt.
ACC 1 = ELEVATE, ACC2 = TILT
TRACTION
30%
LESS
MORE
| | | | | | |
A reduction of the speed when going into and coming out of turns.
•
The higher the value, the greater the reduction in speed.
•
Set at 0% for the majority of wheelchair users.
•
Increasing values may be helpful to soften veer correction in “latched” driving mode,
or to dampen veer correction speed for aggressive drivers.
JSTK THROW
MOVE JOYSTICK TO:
FORWARD_ REVERSE_
LEFT_ RIGHT_ AND
THEN NEUTRAL_
Used to calibrate joystick throw.
•
Sets the point for reaching full speed in relation to joystick displacement.
•
Values DO NOT return to default settings unless Manually Re-Set.
•
Reduces joystick movement required to reach full speed.
1141471-L-00
47