Invacare LiNX REM400, User Manual, Page: 60 / 101

60126081-C 59
Speed reduction is shown in the display. If the elevating seat is
raised above a certain point, an icon with an exclamation point
displays in the status bar. This indicator remains active until
speed reduction is deactivated by lowering the elevating seat.
Seating Function Inhibits
Tilt Limit
The maximum tilt limit switch functions to prevent the seat tilt
or recline from extending beyond a maximum preset angle
when the elevating seat is raised above a certain point. The
seating electronics stop automatically, a grey exclamation point
displays on the seating screen and tilting or reclining backward
is inhibited
A
.
An icon with a seat and an exclamation point displays in the
status bar. The icon remains active until the tilt limit is
deactivated by lowering the elevating seat.
Elevating Seat Lockout
The seating electronics are equipped with an elevating seat
lockout switch to prevent the elevating seat from rising above a
certain point when the seat tilt or recline is adjusted above a
certain point. The seating electronics stop automatically, a grey
exclamation point displays on the seating screen and extend is
inhibited
A .
An icon with a seat and an exclamation point displays in the
status bar. This icon remains active until the elevating seat
lockout is deactivated by moving the seat tilt or recline up.
6.17 Using Connectivity Screens
Connectivity screens allow you to communicate with external
devices. Connectivity functions supported by your remote are a
mouse mover and a switch control. By default, these functions
are disabled. Contact your provider to activate the Connectivity
screens.
The mouse mover function allows you to control the cursor on
a PC or laptop screen with a wheelchair user input, such as the
joystick on the remote module or external joysticks. At the
moment a four-quadrant operation is needed to use the mouse
mover.
The switch control function is an accessibility feature that
allows you to navigate and select items on your mobile device
(Android and iOS) using the remote joystick or touch screen.
6.17.1 Connectivity Card Configuration
Pairing the LiNX System with a User’s Device
To pair the LiNX system with a user’s PC, laptop or mobile
device, open the Connectivity
Settings menu.
6 Usage