Invacare LiNX REM400 User Manual Download Page 14

Page: 14 / 101

60126081-C

4.3 User Function Screen Overview

4.3.1 Left- or Right-Handed

With the LiNX system, it is possible to adjust the function screens for left-handed or right-handed users.

Left-handed

Right-handed

In this manual, only right-handed function screens display. All buttons have the same functions for right- and left-handed
users, so the descriptions can be used for left-handed users, too.

4.3.2 Function Screen Header

The function screen type is identified by the color of the function screen header:

green indicates a drive screen

orange indicates a seating screen

blue indicates a connectivity screen

purple indicates a utility screen

The icon

indicates the type of primary input.

The text

is programmable by your provider and can be used to name the function.

Indicator

Meaning

REM400
REM500

REM2xx

ACU

CREM
CREM-LF

4 Components

Summary of Contents for LiNX REM400






































































































Search results

Summary of Contents for LiNX REM400

Reviews:

Invacare LiNX REM400, User Manual, Page: 14 / 101

Search results

Summary of Contents for LiNX REM400

Reviews: