Invacare LiNX REM400 User Manual Download Page 6 | Manualshive

Page: 6 / 101

Invacare LiNX REM400 User Manual Download Page 6

5

60126081-C

1 General

1.1 About This Manual

This document is a supplement to the mobility device’s documentation.
For more information about the product, for example product safety notices and product recalls, contact your local Invacare
representative. Before reading this manual, make sure you have the latest version. You will find the latest version on the Invacare
website. For the address and website see the back page of this manual.

1.2 Symbols

Signal symbols and/or words are used in this manual and apply to hazards or unsafe practices which could result in personal injury
or property damage. See the information below for definitions of the signal words.

DANGER!

-Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING!

-Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION!

-Caution indicates a potentially hazardous situation which, if not avoided, may result in property damage

or minor injury or both.

-Indicates a hazardous situation that could result in damage to property if it is not avoided.

Gives useful tips, recommendations and information for efficient, trouble-free use.

This symbol identifies a list of various tools, components and items which you will need in order to carry out certain work.

1.3 Prescription Statement

Per 21 CFR 801.109(b)(1) the device is labeled for prescription use only.

CAUTION!

Federal Law (USA) restricts this device to sale by or on the order of a licensed physician.

1.4 Intended Use

Refer to the user manual for the power wheelchair base and for the seating system for the intended use of the mobility
device.

1.4.1 Intended Use—REM 400

The LiNX REM400 is a remote of the LiNX family, intended to allow powered wheelchair users to interact with the LiNX system.
The REM400 remote allows control of drive, actuator, lighting and connectivity functions. It provides an input for battery charging
and contains a Bluetooth interface for connectivity functions only (HID and diagnostics). It is not possible to control the wheelchair
via Bluetooth. The REM400 remote allows the use of alternative drive input controls, such as head controls, and is capable of
providing information about the active user input. It provides an input for battery charging and contains a Bluetooth interface for
connectivity functions only (HID and diagnostics).

1.5 Indication for Use

Refer to the user manual for the base and for the seat for the indication for use for the mobility device.

1.6 Service Life

The expected service life is five years, presuming the product is used daily and in accordance with safety instructions, maintenance
instructions and intended use as stated in this manual.

LiNX® Control System

«
...
4
5
6
7
8
...
»

Summary of Contents for LiNX REM400






































































































Reviews:

No comments