SECTION 7—GENERAL GUIDELINES
20
Part No 1125031
DANGER
Risk of Death, Serious Injury, or Damage
Corroded electrical components due to water, liquid exposure, or incontinent users
can result in death, serious injury, or damage.
Minimize exposure of electrical components to water and/or liquids. Electrical
components damaged by corrosion MUST be replaced immediately.
Wheelchairs that are used by incontinent users and/or are frequently exposed to
water/liquids may require replacement of electrical components more frequently.
Missing attaching hardware could cause instability resulting in death, serious injury
or damage.
Ensure all attaching hardware is present and tightened securely.
WARNING
Risk of Serious Injury or Damage
Attaching hardware that is loosely secured could cause loss of stability resulting in
serious injury or damage
After ANY adjustments, repair or service and before use, make sure that all
attaching hardware is tightened securely.
WARNING
Risk of Death, Serious Injury, or Damage
Improperly connected joystick could cause loss of power resulting in death, serious
injury, or damage.
Ensure the joystick is securely connected to controller.
WARNING
Set-up of the Electronics Control Unit is to be performed only by a qualified
technician. The final adjustments of the controller may affect other activities of the
wheelchair. Damage to the equipment could occur if improperly set-up or adjusted.
WARNING
Except for programming, DO NOT service or adjust the wheelchair while occupied,
unless otherwise noted.
If tilt function is not operating and is in the down (seated) position, prior to servicing
the device, refer to Tilt on page 102 for instructions on how to safely service the tilt
system, actuator or spring assist module.
Always reinstall the spring safety bracket and tether when servicing the PTO Plus
seating system is complete. These safety devices MUST be in place at all times,
otherwise, injury or damage may occur.
A pinch point exists between head tube cap and walking beam.
