background image

11  Warranty

11.1 Limited Warranty—US

Except as otherwise set forth below, Invacare warrants that the 
following components of the mobility device (“product”) will be 
free from defects in materials and workmanship for a period of 
one (1) year from the date Invacare ships the product to the 
original purchaser or provider:  base frame, electronics and 
electrical components (excluding batteries), motors, powered 
seating actuators, gearboxes, bearings and bushings, seat frame, 
fixed seat post, upholstered materials, padded materials, 
casters, tires, and tubes (excluding normal wear and tear).  
Invacare warrants all product batteries will be free from defects 
in materials and workmanship for a period of six (6) months 
from the date Invacare ships the product to the original 
purchaser or provider.  The warranties described above are 
referred to as the “Warranty”.  A copy of the original product 
invoice is required for coverage under the Warranty. 

11.2 Limited Warranty—Canada

Except as otherwise set forth below, Invacare warrants the base 
frame of the mobility device (“product”) will be free from 
defects in materials and workmanship for a period of five (5) 
years from the date Invacare ships the product to the original 
purchaser or provider. Invacare warrants that the seat frame 
and fixed seat post will be free from defects in materials and 

workmanship for a period of three (3) years from the date 
Invacare ships the product to the original purchaser or provider. 
Invacare warrants that the following components of the product 
will be free from defects in materials and workmanship for a 
period of two (2) years from the date Invacare ships the 
product to the original purchaser or provider:  electronics and 
electrical components (excluding batteries), motors, powered 
seating actuators, gearboxes. Invacare warrants that the 
following components of the product will be free from defects 
in materials and workmanship for a period of one (1) year from 
the date Invacare ships the product to the original purchaser or 
provider:  bearings and bushings, upholstered materials 
(excluding normal wear and tear), padded materials (excluding 
normal wear and tear), brake pads (excluding normal wear and 
tear), casters (excluding normal wear and tear), tires and tubes 
(excluding normal wear and tear).  Invacare warrants all product 
batteries will be free from defects in materials and 
workmanship for a period of six (6) months from the date 
Invacare ships the product to the original purchaser or provider. 
The warranties described above are referred to as the 
“Warranty”.  A copy of the original product invoice is required 
for coverage under the Warranty. 

11.3 Repair or Replacement

Invacare's sole obligation and the original purchaser’s exclusive 
remedy under the Warranty is limited to Invacare’s repair 
and/or replacement, at Invacare's option, of defective 

60101876-C

71

11  Warranty

Summary of Contents for Captain's Seat













































































Reviews: