Invacare Captain's Seat User Manual Download

Page: 14 / 76

WARNING!
Risk of Injury

Pinch points can cause injury.
-Be aware that a pinch point

exists between the

head tube cap and walking beam/rear swingarm.

-Be aware that a pinch point

exists

between  the  walking  beam/head  tube  cap  and
telescoping  tube  when  the  wheelchair  is  at
the  lowest  seat  to  floor  height.

-Be aware that a pinch point

may occur when

rotating the center mount front rigging assembly.

Fig. 2-1 Pinch Points — Head Tube Cap/Walking Beam and

Telescoping Tube

Fig. 2-2 Pinch Points — Center Mount Front Rigging

WARNING!
Risk of Injury

Pinch points can cause injury.
A pinch point

exists between the center mount

footrest and casters.
There is limited clearance between centermount
footrest and casters.
-The user's feet MUST remain on the center mount

footrest while operating the wheelchair. If the user's
feet are allowed to rest off the side of the center
mount footrest they may come in contact with the
caster possibly resulting in injury.

60101876-C

Invacare® Captain's Seat

Summary of Contents for Captain's Seat













































































Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands

Invacare Captain's Seat, User Manual

Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands