Invacare Captain's Seat User Manual Download

Page: 54 / 76

at the following locations:
All Wheelchairs — four tie down points

on the

wheelchair base (two at the front and two at the rear).

2. Secure the mobility device by tensioning the belts

in accordance with the tie-down system
manufacturer's user manual.

7.5.2 How The User is Secured Within the Mobility Device

CAUTION!
Risk of injury if the user is not properly secured
within the mobility device

-Even if the mobility device is equipped with a

posture belt, this is no substitute for a proper safety
belt which complies with ISO 10542 in the transport
vehicle. Always use the safety belt installed in the
transport vehicle.

-Safety belts must be in contact with the user's body.

They must not be held at a distance from the user's
body using parts of the mobility device such as
armrests or wheels.

-Safety belts must be pulled as tightly as possible

without causing the user discomfort.

-Safety belts must not be positioned while twisted.
-Ensure that the third seat belt anchorage point is not

fixed directly to the vehicle floor, but to one of the
vehicle uprights.

CAUTION!
Risk of injury during use of the mobility device as a
vehicle seat if a headrest is improperly adjusted or
not installed

This can cause the neck to be hyperextended during
collisions.
-A headrest must be installed. The headrest optionally

supplied for this mobility device by Invacare is
perfectly suitable for use during transport.

-The headrest must be adjusted to the user's

ear height.

Seat belts may not be held at a distance from the user's body
using parts of the mobility device such as armrests or wheels.

60101876-C

Invacare® Captain's Seat

Summary of Contents for Captain's Seat













































































Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands

Invacare Captain's Seat, User Manual

Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands