6.13 Securing the Occupant
6.13.1 Wheelchair-Anchored Belts
WARNING!
Risk of Injury, Damage or Death
Lack or improper use of wheelchair transport
systems may result in injury, damage or death.
-
Use both pelvic and upper torso belts.
-
The pelvic belt that is provided by Invacare has
been tested for use in a motor vehicle on this
wheelchair only. Do not replace the pelvic belt with
a different style pelvic belt.
The wheelchair has been provided with a pelvic belt which
meets the requirements of ANSI/RESNA WC/19.
The pelvic belt provided by Invacare has been designed to
accommodate use on either side of the vehicle.
1. Install the pelvic belt pin
A
into large end of slot
B
in the
belt mounting bracket
C
. Pull upwards until it snaps into
place. Rotate downward and forward until it snaps into
place into the small end of the slot.
There are two pin locations
E
on the pelvic belt
that are used to secure the vehicle-anchored
torso belt.
2. Repeat step 1 for the opposite belt mounting bracket.
3. Install the vehicle-anchored upper torso belt onto the two
pin
E
locations on the pelvic belt.
60101876-C
45
6 Transport - ANSI/RESNA WC-4 Section 19
Summary of Contents for Captain's Seat
Page 74: ...Notes ...
Page 75: ...Notes ...
