Invacare Captain's Seat User Manual Download

Page: 29 / 76

Fig. 4-4 Medium Wide (Three Spacers)

Fig. 4-5 Wide (Four Spacers)

4.4.5 Adjusting the Footplate Angle

Manual Center Mount Footrest is shown for

reference

Rear view of footplate

is shown for clarity.

1. Flip footplate up.

2. Rotate the adjustment screw

in or out until the desired

angle is achieved.

3. Repeat STEPS 1 and 2 for the other footplate.

4.4.6 Adjusting the Tension of the Flip Up Footplate

The tension can be adjusted to increase or decrease

the rotation effort of the flip up footplates

1. Loosen the mounting screw

on the front rigging angle

hinge to decrease the rotation effort.

DO NOT remove the footplate mounting screw.

2. Tighten the front rigging angle hinge mounting screw to

increase the rotation effort.

3. Repeat STEPS 1 and 2 for the other footplate.

60101876-C

4 Setup

Summary of Contents for Captain's Seat













































































Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands

Invacare Captain's Seat, User Manual

Search results

Summary of Contents for Captain's Seat

Reviews:

Related manuals for Captain's Seat

Brands by name

Popular brands