Inspect all fasteners including the back pan, back cane and
angle adjustment fasteners, and the arm support, flip back
and height adjustment fasteners. Ensure fasteners are
securely tightened. Refer to the seating system service
manual for torque specifications and tightening
instructions.
Make sure drive lock-out operates properly.
Check limit switch position.
9.3 Troubleshooting
For troubleshooting information and explanation of
error codes, refer to the wheelchair base user manual
and the individual electronics manual supplied with
each wheelchair.
9.4 Installing/Removing 70NHD Footrest
Illustration reflects right side footrest.
This illustration is for reference only. It accurately
shows how the footrest installs and rotates in place,
however, it does not reflect a captain’s style seat.
Illustration reflects left side footrest.
1. Turn the footrest
A
to the side (open footplate is
perpendicular to the wheelchair.
2. Insert footrest mounting pin
B
into mounting tube
C
.
3. Push the footrest towards the inside of the wheelchair
until it locks in place.
The footplate will be on the inside of the
wheelchair when locked in place.
4. Repeat steps 1 – 3 for other footrest assembly.
5. To remove the footrest, push the footrest release lever
D
inward, rotate footrest outward.
60101876-C
63
9 Service
Summary of Contents for Captain's Seat
Page 74: ...Notes ...
Page 75: ...Notes ...
