secure the footrest assembly
D
to the footrest support
E
.
4. Reposition the lower footrest to the desired height.
5. Reinstall the hex bolt, washers and locknut that secure the
lower footrest to the footrest support and tighten securely.
6. Repeat STEPS 1-5 for the opposite wheelchair
footrest, if necessary.
7. Reinstall the front riggings onto the wheelchair.
8. Reinstall any accessory onto the footrest(s).
9.7 Removing/Installing/Adjusting the
Adjustable Heel Loop
If the user’s physical or medical condition and health
care provider allows, shoes should be worn when
occupying the wheelchair.
9.7.1 Removing the Adjustable Heel Loop
1. Remove the mounting screw
A
, spacer
B
, washer
C
(not
used on deluxe flip up footplate) and cap nut
D
securing
the adjustable heel loop
E
to the footplate
F
.
2. Pull to release the hook (G) and loop (H) strips securing the
adjustable heel loop to the lower footrest tube (I).
3. Remove the adjustable heel loop from the front rigging.
9.7.2 Installing the Adjustable Heel Loop
When installing the adjustable heel loop, wrap the
hook and loop strips wrap around the front rigging
tube as shown. This will ensure the hook strip is facing
towards the rear of the wheelchair.
66
60101876-C
Invacare® Captain's Seat
Summary of Contents for Captain's Seat
Page 74: ...Notes ...
Page 75: ...Notes ...
