Invacare Captain's Seat User Manual Download | Manualshive

Page: 39 / 76

background image

wheel locks as an additional safeguard if not present.

7. Flip up footplates or swing footrests outward.

8. Shift body weight into seat with transfer

During independent transfer, little or no seat
platform will be beneath you. Use a transfer
board if at all possible.

6.5 Weight Training and Other Activities

WARNING!
Risk of Injury or Damage

Invacare  DOES  NOT  recommend  the  use  of  its
wheelchairs  as  a  weight  training  apparatus.  Invacare
wheelchairs  have  NOT  been  designed  or  tested  as  a
seat  for  any  kind  of  weight  training.  Using  said
wheelchair  for  weight  training  could  result  in
serious  bodily  injury  to  the  user,  damage  to  the
wheelchair  and  surrounding  property.  Also,  if
occupant  uses  said  wheelchair  as  a  weight  training
apparatus,  Invacare  shall  NOT  be  liable  for  bodily
injury  and  the  warranty  is  void.
-DO  NOT  use  the  wheelchair  as  a  weight

training apparatus.

WARNING!
Risk of Injury or Damage

Misuse of the wheelchair may result in injury
or damage.
-DO NOT use the wheelchair for stretching exercises.
-DO NOT use the wheelchair to perform wheelies.

60101876-C

39

6 Usage

«
...
37
38
39
40
41
...
»

Summary of Contents for Captain's Seat













































































Reviews:

No comments

Related manuals for Captain's Seat

Brand: E-Wheels Pages: 12

Brand: Vela Pages: 12

Brand: R Healthcare Pages: 19

Brand: Costway Pages: 2

viamobil Series

Brand: Alber Pages: 4

Brand: R82 Pages: 12

Jaco Rehab Edition

Brand: Kinova Pages: 31

Brand: Medifab Pages: 68

Brand: Inglis Pages: 12

Brand: AAT Pages: 40

Brand: Days Pages: 8

Brand: Eclipse Pages: 17

Pronto R2 Series

Brand: Invacare Pages: 60

Brand: R82 Pages: 6

Brand: Quantum Pages: 2

Brand: Quickie Pages: 32

Brand: Drive Pages: 2

Brand: Vermeiren Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands