©2012 ROHO, Inc. Manufactured by ROHO, Inc. The following are registered trademarks of ROHO, Inc.: AGILITY™, ROHO
®
, shape fitting technology
®
.
ROHO, Inc. has a policy of continual product improvement and reserves the right to amend specifications presented in this guide.
Item #: T20217
Rev: 9/12
Print Date: 9/12
Lift back shell up then tilt it backwards
toward the canes.
Hook lower ends of double hooks onto
the lower pins of the cane brackets.
Lock the latches by pushing both left
and right safety locks toward the center
of the back shell to the LOCKED (
)
position.
Reverse these steps for removing AGILITY.
Quick Setup Guide
Push down on back shell until latches
open and upper ends of the double
hooks wrap around the upper pins.
Latches should be fully down in the
closed position.
( ) Note
:
UNLOCK
safety locks to install the AGILITY.
1
6
Tilt back shell toward the canes until
latches rest on upper pins.
3
2
4
5
AGILITY INSTALLATION
Refer to Operations Manual for complete instructions.
WARNING: DO NOT attach AGILITY with the individual seated in the wheelchair.
BACK CANE HARDWARE INSTALLATION
1
2
3
L
R
Loosen cane hardware bolt. Press end
of adjustment cylinder and unclip
the pivoting cane band. Rotate cane
bracket away from the cane band.
Clip cane band around the cane as shown
and tighten cane hardware bolt. Repeat on
opposite cane with the other cane hardware.
Ensure that both cane hardware are
evenly aligned and tighten the hardware
bolts using the provided Allen wrench.
