Intesis
Box
®
KNX
– IR Universal AC
User's manual r1.0 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
tel
http://www.intesisbox.com
[email protected]
+34 938047134
33 / 48
o
If set to
“no”
the communication objects will not be shown.
o
If set to
“yes”
the communication objects and a new parameter will appear. To store a scene through the
byte-type object, a value from
“128”
to
“132”
has to be sent to the object, correponding each one to a
different scene (i.e.
“128” = Scene 1;… “132” = Scene 5).
➢
Enable use of bit objects for storing scenes (from bus)
If set to
“no”
the objects will not be shown.
If set to
“yes”
the
Control_ Store Scene
objects for storing scenes will appear. To store a scene by
using these objects, a
“1”
value has to be sent to the scene’s object we want to store (i.e. to store scene
4, a “1” has to be sent to the
Control_ Store Scene 4
object).
5.8.3 Enable use of bit-field objects for save
This parameter shows/hides the
Control_ Execute Scene
bit-type communication objects.
o
If set to
“no”
the communication objects will not be shown.
o
If set to
“yes”
the communication objects will appear. To execute a scene by using these objects, a
“1”
value has to be sent to the scene’s object we want to execute (i.e. to execute scene 4, a “1” has to be sent
to the
Control_ Execute Scene 4
object).
5.8.4 Enable use of bit-field objects for execute
This parameter shows/hides the
Control_ Execute Scene
bit-type communication objects.
