IntesisBox IS-IR-KNX-1i, User Manual

Page: 34 / 48

Intesis Box
®
KNX
– IR Universal AC
User's manual r1.0 eng
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SLU
URL
Email
tel http://www.intesisbox.com
info@intesisbox.com
+34 938047134
34 / 48
o
If set to
“no”
the communication objects will not be shown.
o
If set to
“yes”
the communication objects will appear. To execute a scene by using these objects, a
“1”
value has to be sent to the
scene’s object we want to execute (i.e. to execute scene 4, a “1” has to be sent
to the Control_ Execute Scene 4 object).
5.8.5
Scene “x” preset
This parameter lets you define a preset for a scene (the following description is valid for all the scenes).
o
If set to
“no” the preset for the scene “x” will be disabled.
o
If set to
“yes”
the preset will be enabled. When a scene is executed the values configured in the preset will
be aplied.
Important:
If a scene’s preset is enabled, will not be possible to modify (store) the scene from the KNX
bus.
➢ Scene “x” / Value for On-Off
This parameter lets you choose the power of the indoor unit when the scene is executed. The following
options are available:
“ON”, “OFF”
or
“(unchanged)”
.
➢
Scene “x” / Value for Mode
This parameter lets you choose the mode of the indoor unit when the scene is executed. The following
options are available:
“AUTO”
,
“HEAT”
,
“COOL”
,
“FAN”
,
“DRY”
, or
“(unchanged)”
.
➢ Scene “x” / Value for Fan Speed
This parameter lets you choose the fan speed of the indoor unit when the scene is executed. The
following options are available:
“SPEED 1”
,
“SPEED 2” … “SPEED N”
, or
“(unchanged)”
.
➢ Scene “x” / Value for Vane Up-Down
This parameter lets you choose the vane position of the indoor unit when the scene is executed. The
following options are available:
“POSITION 1”
,
“POSITION 2” … “POSITION N”, “SWIRL”, “SWING”
or
“(unchanged)”
.
➢ Scene “x” / Value for Vane Left-Right
This parameter lets you choose the vane position of the indoor unit when the scene is executed. The
following options are available:
“POSITION 1”
,
“POSITION 2” … “POSITION N”, “SWIRL”, “SWING”
or
“(unchanged)”
.
➢ Scene “x” / Value for Setp Temp (ºC)
This parameter lets you choose the setpoint temperature of the indoor unit when the scene is executed.
The following options are available: from
“16ºC”
to
“32ºC”
(both included), or
“(unchanged)”
.