17
Getting Started
Interwrite DualBoard
TM
Connect the Video Projector
The Interwrite DualBoard is connected to the computer, either wirelessly
or wired, so it can communicate with the computer as an input device. The
communication between the two is governed by the Interwrite Workspace
software. In order to project what is happening on the computer onto the
DualBoard where everyone can see it, you must have a video projector at-
tached to the computer.
1 Turn off the computer and Interwrite DualBoard.
2 Connect a video cable between the computer and the video projector.
3 Power on the Interwrite DualBoard—it will beep four times to indicate it
has power and then beep once to indicate it has recognized the RFCOM
module, if one is connected for wireless communication.
4 Turn on the computer. The Interwrite DualBoard will beep once when the
connection between the Interwrite DualBoard and the computer has been
established, assuming that the AutoConnect setting is checked.
5 Turn on the video projector.
Interwrite DualBoard
Video Cable
Computer
Video Projector
