13
Getting Started
Interwrite DualBoard
TM
1 Shut down and turn off the computer.
2 Connect the cable to the DualBoard. If you are using the USB cable, plug
the square USB B connector end into the USB Connector on the Interwrite
DualBoard.
Or
, if you are using a PC and using the serial cable, attach one
end of the serial cable to the Serial Connector on the board’s Controller.
3 Plug the flat USB A connector into an available USB port
on your
computer or USB hub, or the serial cable into the serial port on the PC.
4 If necessary, attach the appropriate power plug adapter to the Power
Supply plug, following these simple instructions:
a Remove and discard the Shipping
Collar Insert.
b Note that each plug adapter has a
lip that fits into the recess at the top
of the plug housing. Locate the lip
on the plug adapter you selected and
tilt it into the recess.
c Snap the lower edge of the plug
adapter into the adapter well. If
necessary, slide the thumb grip away
from the well as you push the plug
down into the well.
5 Plug the cylindrical metal end of the
power cord into the Power Connector on
the side of the Controller and plug the
plug into a power socket.*
6 Use the supplied cable guides to manage
dangling cables. Remove the protective
covering to expose the adhesive surface
and stick them where you want to guide
the cable and power cord.
7 Toggle the Power Switch to turn on the
Interwrite DualBoard. It will beep four
times and the Power LED will light up to
indicate the board has power.
8 Turn on the computer. It will automatically find the cable-connected
Interwrite DualBoard.
9 The Pen Prox LED will light up and stay lit as long as the electronic
Interwrite Pen is
in prox of
or touching the Interwrite DualBoard surface.
* The Power Supply is not necessary if you are using only the USB connec-
tion. However, if you are using a serial connection, attaching an RFCOM
module for wireless communication, or attaching the Pen Charging Station,
you must connect the Power Supply.
6
Lip
3
Recess
4
Adapter Well
1
Plug Housing
2
Shipping Collar Insert
5
Thumb Grip
7
Plug Adapter
