14
Interwrite DualBoard
TM
Getting Started
Connect Your Interwrite DualBoard:
RFCOM
and
RF Hub Wireless Installation
The Workspace RF Hub plugs into a USB port on your computer or USB
Hub. The RFCOM is connected to the board via the RFCOM Port on the top
of the DualBoard controller. The RFCOM device sits in the RFCOM holster
that slips over the frame at the top of the board.
RFCOM
1
Plug the RJ12 connector on the RFCOM cable into
the RJ12 COM Port on the top of the Interwrite
DualBoard controller box on the back of the board.
RFCOM
Holster
2
Slide the RFCOM holster over the board’s frame at
the top of the board.
RFCOM
seated in
Holster
3
Seat the RFCOM in the holster.
Workspace
RF Hub
4
Plug the Workspace RF Hub into a USB port on
your computer or USB hub. You should be aware
that the RF Hub works best when it is
not
plugged
into a computer that is under a podium or a desk.
If necessary, use a USB extension cable to get your
RF Hub out from under furniture that may shield the
RF signal.
Activation
Button
Activation
Button
