9
Getting Started
Interwrite DualBoard
TM
Mounting the Interwrite DualBoard
on the Floor Stand
The Interwrite DualBoard is attached to the floor stand with the provided
Knob screws
—two on each side of the board.
3 With one person at each end of the Interwrite DualBoard, position the
Mounting Brackets on either side of the Floor Stand Legs. Thread the top
Knob screw through the Slide Slot in the Mounting Bracket and into the
hole closest to the front edge of the Floor Stand. Screw the second Knob
screw through one of the Ratchet Slots in the Mounting Bracket and into
the screw hole positioned in the middle of the second, lower set of four
Crossbar screws.
The position of the Interwrite DualBoard on the floor stand can be adjusted
by standing in front of the Interwrite DualBoard, grasping the bottom of the
board with both hands, and sliding it up or down, coming to rest on one of
the Ratchet Slots in the Mounting Brackets.
Slide Slot
Ratchet Slot
Knob
screws
Floor Stand
Knob screws
Two people should mount the Interwrite DualBoard on the floor
stand to avoid injury, or damage to the Interwrite DualBoard.
One person can adjust the position of the Interwrite DualBoard up or
down, but be sure to stabilize the floor stand before you attempt to
reposition the board. Lock down the thumb tabs on the Casters, or push
the floor stand against a wall to prevent it from rolling, or put one of
your feet on the Floor Stand Foot to hold it in place as you adjust the
Interwrite DualBoard’s position.
Position the floor stand on a level surface to avoid tipping.
Lower the Interwrite DualBoard to the lowest position on the floor
stand before moving the stand.
Do not hang objects on the Interwrite DualBoard.
