Interphace ULTRASCAN PC90, Operation Manual, Page: 50 / 56

50
Ultrascan’s Web server Page
The Ultrascan beamformer comes with a built-in web server page which can be conveniently
used to change the beamformer’s IP address, subnet mask and several other important properties.
Do not change any of these values unless required. Also, if you change the Ultrascan beamformer's IP
address—make a note of the new address. If you forget the new IP address, you will not be able to
connect to a PC or network and may have to return the red beamformer box to Interphase to reset to
the factory default IP address!
To access the Ultrascan’s web server page, connect a crossover Ethernet cable between a PC and the
Red Ultrascan beamformer . Apply power to the Ultrascan beamformer and wait 30 seconds then en-
ter the Ultrascan beamformer’s IP address into your browser.
The default password to login and make changes is “quicksilver”. If you login, the following screen