Interphace ULTRASCAN PC90, Operation Manual, Page: 23 / 56

23
The Status Bar
The Status Bar displays current information about
Ultrascan PC90 operation including:
• Status Message,
• Ping Light, which alternates between red and
green on consecutive pings,
• Mode, Live or Playback,
• Capture Light, which flashes blue during a
screen capture, and
• Capture Status, showing the screen capture
schedule and remaining hard disk space.
Operating Modes
Ultrascan PC90 operates in one of two modes: Live
and Playback. If all components have been installed,
all cables are connected and the Beamformer Module
is on when you start the software, Ultrascan PC90
will immediately begin to collect and display data in
Live Mode. If a recording is being viewed the unit
will be in the Playback Mode.
Use the File Menu to switch between Playback and
Live modes.
Playback Mode
In Playback Mode, Ultrascan PC90 will continuously
display the recorded data that was installed with the
software or other user recorded videos. Ultrascan
PC90 will look for the recorded data in a folder called
‘Data’ in the Ultrascan PC90 program folder. If no
recording is selected, the display window will remain
blank.
Live Mode
When the Live Mode is selected, Ultrascan PC90 will
attempt to find the beamformer module. When com-
munications begins the ping light on the lower toolbar
will blink between red and green.
Status Bar
Status Message
Mode
Capture Status
Ping Light Capture Light