Intermec EasyLAN 100E User Manual Download Page 63

Page: 63 / 121

EasyLAN User’s Guide

Chapter 4 — Using the EasyLAN Web Browser Interface

Avalanche

Click

Avalanche

to view and change Wavelink Avalanche settings.

Avalanche Screen in EasyLAN Web Browser Interface

To change Avalanche settings, enter information in the entry ﬁ elds and

click

Submit Avalanche settings

to send the changes to the printer.

For more information on Avalanche settings, see the next table.

Avalanche Settings

Setting

Description

Avalanche enabler

settings

Click an option button:

• Disable:

Disables Avalanche.

• Manual settings:

Enables Avalanche. You need to enter the

Agent Address and Port in the entry ﬁ elds.

• Find agent by broadcast:

Enables Avalanche. EasyLAN

broadcasts to ﬁ nd the agent.

Avalanche agent

authorization

Enter your user name and password in the entry ﬁ elds.

Summary of Contents for EasyLAN 100E


























































































































Search results

Summary of Contents for EasyLAN 100E

Reviews:

Related manuals for EasyLAN 100E

Brands by name

Popular brands

Intermec EasyLAN 100E, User Manual

Search results

Summary of Contents for EasyLAN 100E

Reviews:

Related manuals for EasyLAN 100E

Brands by name

Popular brands