Intermec EasyLAN 100E User Manual Download Page 47

Page: 47 / 121

EasyLAN User’s Guide

Chapter 4 — Using the EasyLAN Web Browser Interface

section, “Conﬁ guration.”

• Click

Maintenance

to see the Firmware Upgrade page and upgrade

the printer's ﬁ rmware. For more information, see “Upgrading
Firmware” on page 52.

• Click

Support

to see the Support page, which includes a list of

Intermec links for technical support and customer service. For more
information, see “Contacting Intermec Support” on page 54.

Conﬁ guration

is section shows the current conﬁ guration of the printer. To change

settings, click a link in the left pane to see that page and make changes.

Conﬁ guration Screen

For help with changing printer settings, see “Viewing and Changing
Printer Settings” on page 34.

For help with changing network settings, see “Viewing and Changing
Network Settings” on page 40.

Summary of Contents for EasyLAN 100E


























































































































Search results

Summary of Contents for EasyLAN 100E

Reviews:

Related manuals for EasyLAN 100E

Brands by name

Popular brands

Intermec EasyLAN 100E, User Manual

Search results

Summary of Contents for EasyLAN 100E

Reviews:

Related manuals for EasyLAN 100E

Brands by name

Popular brands