Intermec CN2A User Manual Download Page 43

Page: 43 / 174

Chapter 1 — Using the CN2A Mobile Computer

CN2A Mobile Computer User’s Manual

To access files stored on the SD card

• If you have an SD card inserted in your CN2A, it appears as

the SDMMC Disk folder. To access this folder, double-tap
the

My Computer

icon on the desktop and then double-tap

the SDMMC Disk folder. You can copy files to and from this
folder just as you would any other folder on the CN2A.

To remove the SD card

Press and hold the

Power

key for 2 to 3 seconds, and then

release the

Power

key to turn off the CN2A.

Place the CN2A face-down on a clean, flat, stable surface.

Push down on the battery door latch, and pull up on the
battery door.

Remove the battery door and set it aside.

Insert the stylus between the battery and the CN2A case, and
press straight down until the battery is released.

Remove the battery and set it aside.

Summary of Contents for CN2A















































































































































































Search results

Summary of Contents for CN2A

Reviews:

Related manuals for CN2A

Brands by name

Popular brands

Intermec CN2A, User Manual

Search results

Summary of Contents for CN2A

Reviews:

Related manuals for CN2A

Brands by name

Popular brands