Intermec CN2A, User Manual

Page: 109 / 174

Chapter 4 — Developing and Installing Applications
CN2A Mobile Computer User’s Manual 93
2
Copy your application file to the SD card.
If you are using ActiveSync or Wavelink Avalanche to copy
the files to the SD card, place the application in the SDMMC
Disk folder located in My Computer.
3 If you are using an SD card reader, insert the SD card back
into the CN2A.
4 Navigate to the SDMMC Disk folder and run your
application.
After your application is installed, you can run it from the
Program Files folder from My Computer.
Installing Applications Using the SmartSystems Console
You can use the SmartSystems Console to drag-and-drop
Intermec applications onto your CN2As. The CN2A ships with
the SmartSystems client loaded on it.
The Console is part of SmartSystems Foundation and is available
from the Intermec web site. To download SmartSystems
Foundation, go to www.intermec.com/idl and open the Device
Management page.
To use SmartSystems Console to install an application
1 Download your application file from the Intermec web site
and unzip it on your desktop.
2 From the SmartSystems Console, drag-and-drop the
application onto each CN2A discovered in your network.
For more information on using the SmartSystems Console, see
the online help.
Installing Applications Using Wavelink Avalanche
You can use the Wavelink Avalanche device management system
to install applications on all of your wireless CN2As.
The wireless CN2A ships with the Avalanche Enabler already
loaded on it. The Avalanche Enabler is configured to activate
automatically (typically on a warm boot).
Note: If you manually activate the Avalanche Enabler on the
CN2A, you may be prompted for a password when you exit the
Avalanche Enabler. The default password is
leave
.