Intermec 6820 Series, User Manual

Page: 74 / 184

Using the 6820 Printer Configuration Utility Chapter
—
4
58 6820 Series 80-Column Printer User’s Manual
Copying Font Files
To select font files, highlight the font files in the Fonts Available for Up-
date list. You can highlight several files at one time. Then click the right
arrow pointing to the Fonts Selected for Update list to copy the selected
font files to this list. Below is a sample screen.
If you select enough fonts that go over the space allowed, an error message
appears. Click
OK to close the error message and not copy the font to the
Fonts Selected for Update list. If there are two or more fonts that exceed
the space allowed, this message repeats until an error message is displayed
for each of the font files that went over the space allowed.
Space in Flash
The Space Needed information shown beneath the Fonts Available for
Update list indicates the total space required (in bytes) for all of the fonts
in the list. The Space Remaining information listed below the Fonts Se-
lected for Update list displays the space remaining in the printer, given the
fonts in the Selected list.
Update Printer
This button updates the printer fonts and the control program depending
on the options selected on the dialog.
Note that if the Selected list is empty
and the Include control program update is not checked, a “ Nothing selected
for update ” message appears in the text box.
S Formats the printer flash for font updates and writes new font files to
the printer for any fonts in the
Selected list.
Click the top, right arrow to copy selected font files from the Fonts
Available for Update list to the Fonts Selected for Update list. Click the
bottom, left arrow to remove any selected files from the Fonts Selected
for Update list.
Click Update Printer to update the fonts in the printer with those in
the Fonts Selected for Update list. The Update progress: bar indicates
the progress as the control program or fonts are written to the printer.