Intermec 6820 Series, User Manual

Page: 60 / 184

Using the 6820 Printer Configuration Utility Chapter
—
4
44 6820 Series 80-Column Printer User’s Manual
Parameters Selection
This option, selected from the Main Menu, allows you to review or modify
the working configuration.
Click
Parameters from the Main Menu to access the Parameters window
where you can modify any of the parameters that are not grayed out. De-
fault parameter values are marked with an asterisk (*).
Modifying Parameters
To modify the configuration, select parameters on this screen using your
pointing device.
Required for Bluetooth — Convert the Printer to Epson DTR Mode
Those using Bluetooth must switch the 6820 Printer from the Norand
Portable Communications Protocol (NPCP) mode to the Epson DTR
mode with the baud rate set to “19.2K” and the parity set to “None.”
Note : The 6820 Bluetooth adapter does not support any other settings.
Note : If your version of the Configuration Utility has a 38.4K bit rate
selection, ignore that selection. If selected, it defaults to 19.2K bps. On
future releases, the 38.8K bit rate will not show on the display.
Note : If your version of the Configuration Utility has an XON/XOFF
selection, ignore that selection. If selected, it defaults to DTR. On future
releases, the XON/XOFF protocol will not show on the display.
Saving Parameters
Clicking Save updates the working configuration and returns you to the
Main Menu.
Canceling the Operation
Click Cancel to return to the Main Menu without modifying any configu-
ration parameters.
Save Printer Configuration
These options allow you to save the working configuration to disk or to
printer.
Save is initially grayed out in the Main Menu , and cannot be used until a
configuration is either loaded or modified.