Intermec 6820 Series, User Manual

Page: 175 / 184

Index
159 6820 Series 80-Column Printers User’s Manual
Length of page
set page length (inches), 69
set page length (lines), 69
Line feed (LF), 66
perform line feed, 66
perform n/216-inch line feed, 66
perform n/216-inch reverse line feed, 67
Line spacing
select 1/6-inch line spacing, 70
select 1/8-inch line spacing, 70
select 7/72-inch line spacing, 70
select n/216-inch line spacing, 70
Low-speed graphics functions, select low-speed double den-
sity graphics, 89
M
Margins
set left margin, 71
set right margin, 71
Master
master select, 75
perform master reset, 67
Modes
bottom-up printing, 68
condensed mode, 72
double-strike mode, 73
double-wide mode, 73
elite pitch, 74
emphasized mode, 74
expanded mode.
See Double-wide mode
graphic modes. See Graphics functions, eight-pin modes;
Graphics functions, nine-pin modes
half-speed printing, 66
inactivity time for sleep mode, 66
italic mode, 75
pica pitch, 76
subscript mode, 77
superscript mode, 76
top-down printing, 68
underline, 77
N
National/default character set
select default character set, 85
select national character set, 82
Nine-pin graphics functions
select 9-pin double density graphics mode, 91
select 9-pin single density graphics mode, 90
O
One line printing, select unidirectional (one line) printing,
69
P
Page formatting functions. See Line feed, Line spacing, Mar-
gins, Page length, Perforation
Page length
set page length (inches), 69
set page length (lines), 69
Perforation
cancel skip over perforation, 72
set skip over perforation, 71
Pitch
select elite pitch, 74
select pica pitch, 76
Print position
set print position (absolute), 67
set print position (relative), 68
Printable, expand printable code area, 85
Printing
cancel half-speed printing, 66
cancel unidirectional printing, 68
disable printing of character graphics, 87
disable printing of codes 128-255, 85
enable printing of character graphics, 86
enable printing of codes 128-255, 85
print character graphics, 87
select bottom-up printing, 68
select half-speed printing, 66
select top-down printing, 68
select unidirectional (one line) printing, 69
select unidirectional printing, 68
Q
Quadruple density graphics functions, select low-speed
quadruple density graphics mode, 90
R
Relative, set print position (relative), 68
Reset, perform master reset, 67
Reverse, perform n/216-inch reverse line feed, 67
Right margin, set right margin, 71
ROM to RAM, copy ROM to RAM, 84
S
Single density graphics functions
select 9-pin single density graphics mode, 90
select single density graphics mode, 8-pin, 89
Skip over perforation
cancel skip over perforation, 72
set skip over perforation, 71
Sleep mode, set inactivity time for sleep mode, 66
Space, intercharacter, define intercharacter space, 75
Spacing, line
select 1/6-inch line spacing, 70
select 1/8-inch line spacing, 70
select 7/72-inch line spacing, 70
select n/216-inch line spacing, 70
Subscript
cancel subscript/superscript mode, 77
select subscript mode, 77
Superscript
cancel subscript/superscript mode, 77
select superscript mode, 76