66
TruVision IP Thermal Camera Configuration Manual
Note
: Please refer to the NAS user manual for information on setting the file path.
d) Click
Save
to add the disk.
2. Initialize the disk that has been added.
a) From the Configuration panel, click
Configuration
>
Storage
>
Storage
Management
. See page 17 below for further information.
Storage management
Use the “Storage Management” window to display the capacity, free space available,
and the working status of the HDD of the NAS and the SD card in the camera. You can
also format these storage devices. The storage devices must be added to the system
before they can be managed.
Before formatting a storage device, stop all recording. Once formatting is completed,
reboot the camera as otherwise the device will not function properly.
If
Overwrite
has been enabled, the oldest files are overwritten when the storage device
becomes full.
To format a storage device:
1. From the Configuration panel, click
Configuration
>
Storage
>
Storage
Management
.
2. Select the
HDD No.
check box of the desired storage device.
Select the check box of the uninitialized disk and click the
Format
button to start
initialization. When completed, the status changes to “Normal”.
