TruVision IP Thermal Camera Configuration Manual
37
b) Select the day and click
to set the detailed time period.
c) Click
OK
to save changes.
4. Specify the linkage method for when an event occurs.
Select one or more response methods for the system when a motion detection
alarm is triggered.
Notify Surveillance Center
Send an exception or alarm signal to remote management software
when an event occurs.
Send Email
Sends an email to a specified address when there is a motion
detection alarm.
Note:
You must configure email settings before enabling this option.
See “To set up the email parameters” on page 18 for further
information. If you want to send the event snapshot together with the
email, select the “Attached Snapshot” option.
Upload to FTP
Captures the image when an alarm is triggered and uploads the
snapshot to an FTP server.
Note
: To upload the snapshot to an FTP, you must first configure the
FTP settings. See “To define the FTP parameters” on page 18 for
further information. Enable the
Upload Type
option.
To upload the snapshot to FTP when motion detection or an alarm
input is triggered, you must also select the
Enable Event-triggered
Snapshot check box
in the snapshot parameters. See “Snapshot
parameters” on page 54 for further information.
Trigger Channel
Triggers the recording to start in the camera.
5. If required, select another day of the week to set a different schedule, or copy the
same schedule to other days of the week.
6. Click
Save
to save changes.
