34
TruVision IP Thermal Camera Configuration Manual
To set up motion detection in normal mode:
1. From the Configuration panel, click
Configuration
>
Basic Event
>
Motion
Detection
.
2. Set the motion detection area.
a) Select the
Enable Motion Detection
box. Select
Enable Dynamic Analysis for
Motion
if you want to see real-time motion events.
Note:
Select
Disable
under Rules in the
Local Configuration
menu if you do not
want the detected object displayed in green frames.
b) Select
Normal
mode from the drop-down menu.
c) Click
Draw Area
. Click and drag the mouse on the live video image to draw an
area sensitive to motion detection.
d) Click
Stop Drawing
to finish drawing. Click
Clear All
to delete all areas marked
and restart drawing.
e) Move the
Sensitivity
slider to set the sensitivity of the detection. All areas will
have the same sensitivity level.
3. Set the arming schedule.
a) Click
Edit
to edit the arming schedule. The “Edit Schedule Time” pop-up window
appears.
b) Select the day of the week and click
to set the detailed time period. You can
copy the schedule to other days of the week by selecting the check boxes for the
desired days of the week and clicking
Copy
.
c) Click
OK
to save changes and to return to the motion detection window.
4. Specify the linkage method for when an event occurs.
Select one or more response methods for the system when a motion detection
alarm is triggered.
