64
TruVision IP Thermal Camera Configuration Manual
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds or seconds.
6. Under
Capture Number
, enter the total number of snapshots that can be taken.
7. Click
Save
to save changes.
To upload snapshots to an FTP:
1. From the Configuration panel, click
Configuration
>
Network
>
FTP
.
2. Configure the FTP settings and select
Upload Type
. See page 18 for further
information. Click
Save
to save changes.
3. To upload continuous snapshots to an FTP:
From the Configuration panel, click
Configuration
>
Storage
>
Snapshot
. Enable
the option
Enable Timing Snapshot
if you want continuous snapshots to be
uploaded to the FTP. Click
Save
to save changes.
4. To upload event-triggered snapshots to an FTP:
a)
Motion detection event
: From the Configuration panel, click
Configuration
>
Basic Event
>
Motion Detection
. Specify the linkage method as
Load to FTP
.
See page 34 or 35 for further information.
Scene change detection event
: From the Configuration panel, click
Configuration
>
Smart Event
>
Scene Change Detection
. Specify the linkage
method as
Load to FTP
. See page 42 for further information.
Fire detection event
: From the Configuration panel, click
Configuration
>
Smart Event
>
Fire Source Detection
. Specify the linkage method as
Load to
FTP
. See page 43 for further information.
Temperature measurement event
: From the Configuration panel, click
Configuration
>
Temperature Measurement
>
Temperature Measurement
Configuration
. Specify the linkage method as
Load to FTP
. See page 46 for
further information.
b) From the Configuration panel, click
Configuration
>
Storage
>
Snapshot
.
Enable the option
Enable Event-Triggered Snapshot.
Click
Save
to save
changes.
