manualshive.com logo in svg

Interlogix GE-DSSG-244, User Manual

The Interlogix GE-DSSG-244 User Manual is a vital resource for setting up and operating your device. This comprehensive manual covers every aspect of the product, and you can conveniently download it for free from manualshive.com. With step-by-step instructions, troubleshooting tips, and important safety information, it ensures a smooth user experience.

Share
Download
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual 

     

 

167 

 

1

: ARP/RARP frames where the PRO is equal to IP (0x800) must match this 

entry.  

Any

: Any value is allowed ("don't-care"). 

 

„

 

IP Parameters 

The IP parameters can be configured when Frame Type "IPv4" is selected. 

Object 

Description 

•

 

IP Protocol Filter

 

Specify the IP protocol filter for this ACE.   

Any

: No IP protocol filter is specified ("don't-care").   

Specific

: If you want to filter a specific IP protocol filter with this ACE, choose 

this value. A field for entering an IP protocol filter.   

ICMP

: Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining 

ICMP parameters will appear. These fields are explained later in this help file.   

UDP

: Select UDP to filter IPv4 UDP protocol frames. Extra fields for defining UDP 

parameters will appear. These fields are explained later in this help file.   

TCP

: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining TCP 

parameters will appear. These fields are explained later in this help file. 

•

 

IP Protocol Value 

When "Specific" is selected for the IP protocol value, you can enter a specific 
value. The allowed range is 

0

 to 

255

. A frame that hits this ACE matches this IP 

protocol value. 

•

 

IP TTL 

Specify the Time-to-Live settings for this ACE.   

zero

: IPv4 frames with a Time-to-Live field greater than zero must not be able to 

match this entry. 

non-zero

: IPv4 frames with a Time-to-Live field greater than zero must be able 

to match this entry.   

Any

: Any value is allowed ("don't-care"). 

•

 

IP Fragment 

Specify the fragment offset settings for this ACE. This involves the settings for the 
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an 
IPv4 frame.   

No

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater 

than zero must not be able to match this entry.   

Yes

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater 

than zero must be able to match this entry.   

Any

: Any value is allowed ("don't-care"). 

•

 

IP Option 

Specify the options flag setting for this ACE. 

No

: IPv4 frames where the options flag is set must not be able to match this entry. 

Yes

: IPv4 frames where the options flag is set must be able to match this entry.   

Any

: Any value is allowed ("don't-care"). 

•

 

SIP Filter 

Specify the source IP filter for this ACE.   

Any

: No source IP filter is specified. (Source IP filter is "don't-care".)   

Host

: Source IP filter is set to Host. Specify the source IP address in the SIP 

Address field that.   

Network

: Source IP filter is set to Network. Specify the source IP address and 

source IP mask in the SIP Address and SIP Mask fields that appear. 

•

 

SIP Address 

When "Host" or "Network" is selected for the source IP filter, you can enter a 
specific SIP address in dotted decimal notation. 

•

 

SIP Mask 

When "Network" is selected for the source IP filter, you can enter a specific SIP 
mask in dotted decimal notation. 

•

 

DIP Filter 

Specify the destination IP filter for this ACE.   

Any

: No destination IP filter is specified. (Destination IP filter is "don't-care".)   

Host

: Destination IP filter is set to Host. Specify the destination IP address in the 

DIP Address field that. 

Network

: Destination IP filter is set to Network. Specify the destination IP 

address and destination IP mask in the DIP Address and DIP Mask fields that 
appear. 

•

 

DIP Address 

When "Host" or "Network" is selected for the destination IP filter, you can enter a 
specific DIP address in dotted decimal notation. 

•

 

DIP Mask 

When "Network" is selected for the destination IP filter, you can enter a specific 
DIP mask in dotted decimal notation. 

Summary of Contents for GE-DSSG-244





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for GE-DSSG-244

Panasonic KX-UDS124 Important Information Manual preview
KX-UDS124
Brand: Panasonic Pages: 44
Patton electronics Patton SmartNode 2300 Series Specification Sheet preview
Patton SmartNode 2300 Series
Brand: Patton electronics Pages: 2
Paradyne 8540 Installation Instructions Manual preview
8540
Brand: Paradyne Pages: 12
Garland INT10G10SP2 User Manual preview
INT10G10SP2
Brand: Garland Pages: 6
Ubiquiti PowerBeam AC Gen2 Quick Start Manual preview
PowerBeam AC Gen2
Brand: Ubiquiti Pages: 22
WolfPack 18x18 Card Cage User Manual preview
18x18 Card Cage
Brand: WolfPack Pages: 31
SmartBridges airHaul Nexus sB3010 User Manual preview
airHaul Nexus sB3010
Brand: SmartBridges Pages: 80
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Zhone 6388-A1-XXX Technical Specifications preview
6388-A1-XXX
Brand: Zhone Pages: 2
National Instruments NI 9229E Operating Instructions Manual preview
NI 9229E
Brand: National Instruments Pages: 26
TP-Link TD-W8101G Quick Installation Manual preview
TD-W8101G
Brand: TP-Link Pages: 16
ADTRAN 1700601G2 Quick Start Manual preview
1700601G2
Brand: ADTRAN Pages: 4
GSA Bolide BN-NVR/NX User Manual preview
Bolide BN-NVR/NX
Brand: GSA Pages: 101
Intellinet 560665 User Manual preview
560665
Brand: Intellinet Pages: 32
ZyXEL Communications ONU5100-B22 User Manual preview
ONU5100-B22
Brand: ZyXEL Communications Pages: 2
ZyXEL Communications GS1900 Series User Manual preview
GS1900 Series
Brand: ZyXEL Communications Pages: 263
TP-Link Archer AX10000 Quick Installation Manual preview
Archer AX10000
Brand: TP-Link Pages: 2
Hirschmann MM2-2FXM3/2TX1 Description And Operating Instructions preview
MM2-2FXM3/2TX1
Brand: Hirschmann Pages: 8

Brands by name

Popular brands

Load more brands