![background image](http://html.mh-extra.com/html/interlogix/ge-dssg-244/ge-dssg-244_user-manual_2077088205.webp)
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
203
Set the Ports Authenticate Status to “
Force Authorized
” if the port is connected to the RADIUS
server or the port is an uplink port that is connected to another switch. Or once the 802.1X stat to
work, the switch might not be able to access the RADIUS server.
4.11.10 802.1X Client Configuration
Windows XP supports 802.1X. Previously released operating systems (windows 98SE, ME, 2000), an 802.1X client utility is needed.
The following procedures show how to configure 802.1X Authentication in Windows XP.
Please note that if you want to change the 802.1x authentication type of a wireless client, i.e. switch to EAP-TLS from EAP-MD5,
you must remove the current existing wireless network from your preferred connection first, and add it in again.
Configure Sample: EAP-MD5 Authentication
1. Go
to
Start
>
Control Panel,
double-click on “
Network Connections
”.
2. Right-click on the Local Network Connection.
3. Click
“
Properties
” to open up the Properties setting window.
Figure 4-11-18
4. Select
“
Authentication
” tab.
5. Select
“
Enable network access control using IEEE 802.1X
” to enable 802.1x authentication.
6. Select
“
MD-5 Challenge
” from the drop-down list box for EAP type.
Summary of Contents for GE-DSSG-244
Page 1: ...P N 1072570 REV 00 10 ISS 13JUN13 IFS NS3601 24P 4S GE DSSG 244 GE DSSG 244 POE User Manual ...
Page 10: ......
Page 38: ...IFS NS3601 24P 4S GE DSSG 244 and 244 POE User Manual 36 ...
Page 132: ...IFS NS3601 24P 4S GE DSSG 244 and 244 POE User Manual 130 Figure 4 8 1 Multicast Service ...