Interlogix GE-DSSG-244, User Manual

Page: 336 / 412

User’s Manual of NS3601-24P/4S Series
334
Example:
Set 30sec for server timeout
SWITCH/>
security aaa timeout 30
Security AAA Deadtime
Description:
Set or show server dead time.
Syntax:
Security AAA Deadtime [<dead_time>]
Parameters:
<dead_time>
: Time that a server is considered dead if it doesn't answer a request (0-3600 seconds)
(default: Show server dead time configuration)
Default Setting:
300
Example:
Set 1000sec for server dead time
SWITCH/>
security aaa deadtime 1000
Security AAA RADIUS
Description:
Set or show RADIUS authentication server setup.
Syntax:
Security AAA RADIUS [<server_index>] [enable|disable] [<ip_addr_string>] [<secret>] [<server_port>]
Parameters:
The server index (1-5)
(default: Show RADIUS authentication server configuration)
enable
: Enable RADIUS authentication server
disable
: Disable RADIUS authentication server
(default: Show RADIUS server mode)
<ip_addr_string>
: IP host address (a.b.c.d) or a host name string
<secret>
: Secret shared with external authentication server.
To set an empty secret, use two quotes ("").
To use spaces in secret, enquote the secret.
Quotes in the secret are not allowed.
<server_port>
: Server UDP port. Use 0 to use the default RADIUS port (1812)
Example:
Set RADIUS authentication server configuration.
SWITCH/>
security aaa radius 1 enable 192.168.0.20 12345678 1812
Security AAA ACCT_RADIUS
Description:
Set or show RADIUS accounting server setup.
Syntax:
Security AAA ACCT_RADIUS [<server_index>] [enable|disable] [<ip_addr_string>] [<secret>] [<server_port>]
Parameters: