manualshive.com logo in svg

Interlogix GE-DSSG-244, User Manual

The Interlogix GE-DSSG-244 User Manual is a vital resource for setting up and operating your device. This comprehensive manual covers every aspect of the product, and you can conveniently download it for free from manualshive.com. With step-by-step instructions, troubleshooting tips, and important safety information, it ensures a smooth user experience.

Share
Download
background image

User’s Manual of NS3601-24P/4S Series 

323

 

1 

 

Example:

   

 Set rate limit value in 1024k for port 1 

SWITCH/>

security

 

network acl rate 1 1024k

 

 
 

Security Network ACL Add 

Description: 

Add or modify Access Control Entry (ACE). 
 
If the ACE ID parameter <ace_id> is specified and an entry with this ACE ID already exists, the ACE will be modified. 
Otherwise, a new ACE will be added. If the ACE ID is not specified, the next available ACE ID will be used. 
 
If the next ACE ID parameter <ace_id_next> is specified, the ACE will be placed before this ACE in the list. If the next 
ACE ID is not specified, the ACE will be placed last in the list. 
 
If the Switch keyword is used, the rule applies to all ports. If the Port keyword is used, the rule applies to the specified port 
only. If the Policy keyword is used, the rule applies to all ports configured with the specified policy. The default is that the 
rule applies to all ports. 
 

Syntax: 

Security Network ACL Add [<ace_id>] [<ace_id_next>] [switch | (port <port>) | (policy <policy>)] [<vid>] [<tag_prio>] 

[<dmac_type>] [(etype [<etype>] [<smac>] [<dmac>]) | (arp    [<sip>] [<dip>] [<smac>] [<arp_opcode>] [<arp_flags>]) |        
(ip [<sip>] [<dip>] [<protocol>] [<ip_flags>]) | (icmp [<sip>] [<dip>] [<icmp_type>] [<icmp_code>] [<ip_flags>]) | (udp 
[<sip>] [<dip>] [<sport>] [<dport>] [<ip_flags>]) | (tcp [<sip>] [<dip>] [<sport>] [<dport>] [<ip_flags>] [<tcp_flags>])] 
[permit|deny] [<rate_limiter>] [<port_copy>] [<logging>] [<shutdown>] 

 

Parameters: 

<ace_id>      

: ACE ID (1-128), default: Next available ID

 

<ace_id_next>

 : Next ACE ID (1-128), default: Add ACE last

 

switch               

: Switch ACE keyword

 

port                   

: Port ACE keyword

 

<port>               

: Port number

 

policy               

: Policy ACE keyword

 

<policy>           

: Policy number (1-8)

 

<vid>                 

: VLAN ID (1-4095) or 'any' 

<tag_prio>    

: VLAN tag priority (0-7) or 'any'

 

<dmac_type>   

: DMAC type: any|unicast|multicast|broadcast 

etype                 

: Ethernet Type keyword

 

<etype>       

: Ethernet Type or 'any'

 

<smac>               

: Source MAC address (xx-xx-xx-xx-xx-xx) or 'any'

 

<dmac>               

: Destination MAC address (xx-xx-xx-xx-xx-xx) or 'any'

 

arp                     

: ARP keyword

 

<sip>                 

: Source IP address (a.b.c.d/n) or 'any'

 

<dip>                 

: Destination IP address (a.b.c.d/n) or 'any'

 

<arp_opcode>  

: ARP operation code: any|arp|rarp|other

 

<arp_flags>   

: ARP flags: request|smac|tmac|len|ip|ether [0|1|any] 

ip                       

: IP keyword 

<protocol>    

: IP protocol number (0-255) or 'any' 

<ip_flags>    

: IP flags: ttl|options|fragment [0|1|any]

 

icmp                   

: ICMP keyword

 

<icmp_type>   

: ICMP type number (0-255) or 'any'

 

<icmp_code>   

: ICMP code number (0-255) or 'any'

 

udp                     

: UDP keyword

 

<sport>           

  : Source UDP/TCP port range (0-65535) or 'any'

 

<dport>             

: Destination UDP/TCP port range (0-65535) or 'any'

 

tcp                     

: TCP keyword 

<tcp_flags>   

: TCP flags: fin|syn|rst|psh|ack|urg [0|1|any]

 

permit               

: Permit forwarding (default)

 

deny                   

: Deny forwarding 

<rate_limiter>

: Rate limiter number (1-15) or 'disable'

 

<port_copy>   

: Port number for copy of frames or 'disable' 

<logging>     

: System logging of frames: log|log_disable

 

Summary of Contents for GE-DSSG-244





























































































































































































































































































































































































































Reviews:

No comments

Related manuals for GE-DSSG-244

D-Link DSL-G2562DG Quick Start Manual preview
DSL-G2562DG
Brand: D-Link Pages: 2
D-Link DSL-2730B Technical Support preview
DSL-2730B
Brand: D-Link Pages: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Brand: D-Link Pages: 2
Paradyne 4300 Installation Instructions Manual preview
4300
Brand: Paradyne Pages: 22
ICP DAS USA I-7532M-FD User Manual preview
I-7532M-FD
Brand: ICP DAS USA Pages: 48
ICP DAS USA WF-2572 User Manual preview
WF-2572
Brand: ICP DAS USA Pages: 24
ICP DAS USA MSM-508 Quick Start preview
MSM-508
Brand: ICP DAS USA Pages: 4
Magnadyne RV2458 User Manual preview
RV2458
Brand: Magnadyne Pages: 13
Qualys GUARD Quick Start Manual preview
GUARD
Brand: Qualys Pages: 2
SAF Phoenix G2 IDU Quick Start Manual preview
Phoenix G2 IDU
Brand: SAF Pages: 30
ZyXEL Communications ADSL/ADSL2/ADSL2+ Router 660R-6xC Series User Manual preview
ADSL/ADSL2/ADSL2+ Router 660R-6xC Series
Brand: ZyXEL Communications Pages: 282
Abocom PLS342 Specification Sheet preview
PLS342
Brand: Abocom Pages: 2
TP-Link TL-MR3620 Installation Manual preview
TL-MR3620
Brand: TP-Link Pages: 2
Hama 49062 Instruction Manual preview
49062
Brand: Hama Pages: 24
Quatech Device Server User Manual preview
Device Server
Brand: Quatech Pages: 98
ADTRAN 1202052L1 User Manual preview
1202052L1
Brand: ADTRAN Pages: 136
Ryobi RE180PL1 Operator'S Manual preview
RE180PL1
Brand: Ryobi Pages: 44
National Instruments USB device 622x User Manual preview
USB device 622x
Brand: National Instruments Pages: 23

Brands by name

Popular brands

Load more brands