IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
188
for a given port (left-most
table) or client (right-most
table). Possible
retransmissions are not
counted.
Information about the last supplicant/client that attempted to authenticate. This
information is available for the following administrative states:
Port-based 802.1X
Single 802.1X
Multi 802.1X
MAC-based Auth
.
Name
IEEE Name
Description
MAC
Address
dot1xAuthLastEapolF
rameSource
The MAC address of the last supplicant/client.
VLAN ID
-
The VLAN ID on which the last frame from the
last supplicant/client was received.
Version
dot1xAuthLastEapolF
rameVersion
802.1X-based
:
The protocol version number carried in the most
recently received EAPOL frame.
MAC-based
:
Not applicable.
•
Last Supplicant/Client
Info
Identity
-
802.1X-based
:
The user name (supplicant identity) carried in the
most recently received Response Identity
EAPOL frame.
MAC-based
:
Not applicable.
Selected Counters
Object
Description
•
Selected Counters
The Selected Counters table is visible when the port is one of the following
administrative states:
Multi 802.1X
MAC-based Auth
.
The table is identical to and is placed next to the Port Counters table, and will be empty if
no MAC address is currently selected. To populate the table, select one of the attached
MAC Addresses from the table below.
Port Counters
Object
Description
•
Identity
Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.
Clicking the link causes the supplicant's EAPOL and Backend Server counters to be
shown in the Selected Counters table. If no supplicants are attached, it shows No
supplicants attached.
This column is not available for MAC-based Auth.
•
MAC Address
For Multi 802.1X, this column holds the MAC address of the attached supplicant.
For MAC-based Auth., this column holds the MAC address of the attached client.
Clicking the link causes the client's Backend Server counters to be shown in the
Selected Counters table. If no clients are attached, it shows No clients attached.
•
VLAN ID
This column holds the VLAN ID that the corresponding client is currently secured
through the Port Security module.
•
State
The client can either be authenticated or unauthenticated. In the authenticated state, it is
allowed to forward frames on the port, and in the unauthenticated state, it is blocked. As
long as the backend server hasn't successfully authenticated the client, it is
Summary of Contents for GE-DSSG-244
Page 1: ...P N 1072570 REV 00 10 ISS 13JUN13 IFS NS3601 24P 4S GE DSSG 244 GE DSSG 244 POE User Manual ...
Page 10: ......
Page 38: ...IFS NS3601 24P 4S GE DSSG 244 and 244 POE User Manual 36 ...
Page 132: ...IFS NS3601 24P 4S GE DSSG 244 and 244 POE User Manual 130 Figure 4 8 1 Multicast Service ...
