26 Chapter 3 - Opening and Closing the Base Unit
2.
Lift up the top cover above the ISA I/O panel and pull up and back.
3.
Set the top cover aside. The following figure shows inside the base
unit.
Peripheral
Brace
Riser Card
Combo
Drive
System
Board
Auxiliary Disk
Drive Bracket
Memory Sockets
CD-ROM
Drive
SCSI Terminator
Card
Power Supply
4.
Take precautions to avoid electrostatic discharge, as described in the
next section, whenever the base unit is open.
Avoiding Electrostatic Discharge
Some of the sensitive components inside the base unit can be damaged by
static electricity. To minimize this possibility, take the following
precautions when working with the internal components of the system to
avoid electrostatic discharge.
♦
Touch the bare metal of the base unit to discharge any accumulated
electrostatic charge.
Summary of Contents for TDZ-300
