Appendix B - Hardware Information 113
CPU Frequency
Systems designated as 150 MHz use the 60 MHz P6 bus, with jumpers
installed to obtain the 5/2x multiplier. Systems designated as 180 MHz use
the 60 MHz P6 bus, with jumpers installed to obtain the 3x multiplier.
Systems designated as 200 MHz use the 66.67 MHz P6 bus, with jumpers
installed to obtain the 3x multiplier.
The following tables show how each multiplier is achieved. IN denotes the
jumper is installed on both connector pins.
Primary CPU Multiplier (J60 - J63)
Jumper
Connector
2x
5/2x
3x
7/2x
4x
5x
J60
IN
IN
IN
IN
IN
IN
J61
IN
OUT
IN
OUT
IN
IN
J62
IN
IN
IN
IN
OUT
OUT
J63
IN
IN
OUT
OUT
IN
OUT
Secondary CPU Multiplier (J47 - J50)
Jumper
Connector
2x
5/2x
3x
7/2x
4x
5x
J49
IN
IN
IN
IN
IN
IN
J50
IN
OUT
IN
OUT
IN
IN
J47
IN
IN
IN
IN
OUT
OUT
J48
IN
IN
OUT
OUT
IN
OUT
The following figure shows the detail of the CPU frequency jumper
connectors.
Summary of Contents for TDZ-300
