Chapter 4 - Maintaining the System 53
Changing the System Boot Sequence
➤
To change the workstation boot sequence:
1.
Restart the workstation. The American Megatrends banner screen
displays with the following message:
Press DEL if you want to run Setup
2.
Press
DELETE
. The AMIBIOS Setup Main Menu displays.
3.
Click on the Advanced icon. A list of parameters displays.
4.
Click on the System Boot Up Sequence parameter. The Options menu
displays with choice of boot sequences. The default is C:, A:, which
designates the system hard disk drive (C:) is the initial device,
followed by the floppy disk drive (A:).
5.
Click on the A:, C: parameter to change the boot sequence; then, press
ENTER
.
6.
Select the Exit and Save option to exit the AMIBIOS Setup program.
7.
Insert an MS-DOS-bootable diskette into the floppy disk drive; then,
restart the system.
For more information about the AMIBIOS Setup program, refer to Chapter
7, “Using AMIBIOS Setup.”
Summary of Contents for TDZ-300
