DG200
User’s Guide
80
Appendix C - Specification
A1. Hardware Specifications
Local Interface
•
Four port 10Base-T/100Base-TX Ethernet Switch (4 * RJ-45 connectors), IEEE
802.3u with MDI/MDIX auto-detection
•
Two USB 2.0 Host Port
•
10/100/1000Base-T Gigabit Ethernet port
•
Integrated 802.11b/g/n WLAN Access Point
WAN DSL Line Interface
•
Compliant with ITU-T G.993.1, G.993.2 with profile 8x, 12x and 17a. ANSI
T1.424 trial use standard, ETSI TS 101270, IEEE 802.3ah 10 PASS TS D2.1,
China’s national VDSL standards.
•
Compliant with ITU-T G.992.1, G.992.2, G.992.3, G.992.5 and ANSI T1.413
Issue 2
•
Annex A (over PSTN) or B (over ISDN) is supported by different model.
•
Line Impedance: 100
Ω
•
Connection Loops: One (pair wire)
•
Connector: RJ-11
•
Optional 10/100/1000Base-T Gigabit Ethernet WAN port in RJ-45, comply with
IEEE 802.3/802.3u/802.3ab
Indicators
•
PWR – Green LED indicates power and operation. Red LED indicates failure.
•
LAN – Green LED indicates LAN connection
•
GE LAN – Orange LED indicates 1000Mbps connection speed and Green LED
indicates 100Mbps
•
TEL1 and TEL2 – Green LED indicates SIP registered and Orange LED indicates
off-hook.
•
WLAN – Green LED indicates wireless AP enabled
•
USB – Green LED indicates USB connection
•
DSL – Green LED indicates broadband connection
•
Internet – Green LED indicates PPP connection and Red LED indicates PPP
failure or device in BRIDGE mode.
OAM&P
•
Local: Telnet and Web management
•
Remote: Telnet and Web Management
Environment
•
Operation Temperature: 0
°
C ~ 40
°
C
•
Operation Humidity: 5% ~ 95%
•
Storage Temperature: -20 ~ +70
°
C
•
Storage Humidity: 5%~95%
Power
•
AC Adapter: Input 100~240VAC, 50/60Hz; Output 12VDC 2A
Certificates
•
CE, CB (TBD)
A2. Software Specifications
Bridging
•
Transparent Bridging and spanning (IEEE 802.1D) with at least 32 MAC
addresses
•
RFC2684 (RFC 1483) Bridged
•
Bridge filtering with per-port extensions