DG200 Series
User’s Guide
37
Static Route
Figure 52: Static Route Configuration
Click Add to add the static route path.
Figure 53: Add Static Route Configuration
Global Setting
Enter the
Destination Network Address
and
Subnet Mask
(range)
Select the
Use Interface
from the list
Enter the
Use Gateway IP Address
where packet will be forwarded to.
Click
Save
to save the configuration
RIP
Figure 54: RIP Configuration
Global Setting
Select the desired
RIP version
and
operation
, followed by placing a check in the
'Enabled' checkbox for the interface.
Click
Save
to save the configuration
The RIP can not be configured if the WAN interface has NAT enabled.
