iQue
®
Screener PLUS Hardware Manual: Part Number 11811 Rev A, Maintenance: Managing Plate Models
76
Plate Model Selection is Part of Protocol
Each plate on each experiment has a set of Protocol settings that control how the plate is run. On the Sample
section, there is a field for Plate Model. This is where the plate model is selected.
By default, the system comes with only two plate models listed: the Generic 96 Well Plate and Generic 384 Well
Plate models. Additional plate models may be added to this list for each format.
Note that in a multi-instrument installation, each plate model is only set up once but must be mapped for each
individual instrument. Plate models are global and are shared among multiple instruments.
