75
OPERATING THE ACU
Heading
Latitude & longitude
Save
L A T I T U D E L O N G I T U D E
3 7 . 0 0 N 1 2 6 . 5 0 E
5. Set the current LATITUDE and LONGITUDE
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Or press NUMBER keys to set the desired value directly.
Press the OK key to set the parameter.
H E A D I N G
0 9 0 . 0
6. Entry of ship’s heading is not required when your system is connected to a NMEA(0813)
or NMEA2000.
Ensure that the supported Gyro Type is set correctly. If the ship's gyrocompass output is
other than NMEA0183 and NMEA2000, a purchase of an NMEA converter is required.
S A V E ?
Y E S N O
7. Press LEFT arrow key to move cursor to YES and press OK key to save current settings.
Or move cursor to NO and press OK key to abort and return to the main display.
