v130G – Marine Satellite Communication System
68
D V B V E R I F Y S K E W O F F S E T
D V B D E C O D E
+ 0 . 0
6. Edit satellite
DVB VERIFY
* method and SKEW OFFSET.
DVB VERIFY will be only activated and applied when DVB mode for the TRACKING SIGNAL
is chosen to be used. Press UP and DOWN arrow keys to select DVB VERIFY and press OK
key to set the parameter.
DVB VERIFY
*
AGC – use signal level for satellite tracking.
DVB Lock – use DVB Lock for satellite tracking.
DVB Decode – use DVB Decode for satellite tracking.
DSS Decode – use DSS Decode for satellite tracking.
S E L E C T L O C A L T R A C K I N G S I G N A L
1 1 3 0 0 M H z
N B D
7. Set
SELECT LOCAL
* frequency and
TRACKING SIGNAL
*.
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Press OK key to set the parameter.
R X P O L
T X P O L
V E R T .
H O R I .
8. Set RX POL and TX POL
To select the polarity for both RX (receive ) and TX (transmit ).
Press UP and DOWN arrow keys to select VERTICAL or HORIZONTAL.
Press OK key to set the parameter.
DVB verifiy method
Set polarity
Set LNB local frequency
TRACKING SIGNAL
*
NBD
DVB
SELECT LOCAL
*
The selectable LNB frequencies
are depended on the installed LNB
type.
