v130G – Marine Satellite Communication System
100
- DVB/NBD:
sets tracking transponder
information for either DVB tracking mode (Verification Type, Frequency, Symbol
rate, and NID) or NBD tracking mode (Frequency and bandwidth).
NOTE:
DVB and NBD parameter settings should only be changed by an authorized
service technician. Improper setting of these parameters will render your system
inoperable. Consult Intellian for changing antenna parameters.
- LNB Local Frequency:
Displays or sets LNB local frequency and its corre-
sponding LNB voltage supplied. You may select pre-programmed LNB LO settings
from the drop down list. This procedure is same for both the Intellian Global VSAT
PLL LNB and any other LNB.
- Tracking Information of Library:
Selecting this option enables “Add Satellite”,
“Edit Satellite” and “Delete Satellite” buttons.
· Eutelsat:
Select 'ON' when the antenna is tracking an Eutelsat satellite.
With this option enabled, a defined skew angle for each Eutelsat satellite
is automatically applied without allowing a manual modification to the
skew offset value.
· Get Library From PC :
opens the satellite library file (File format:*.ilf)
from the PC.
· Get Data From ACU:
obtains the satellite information from the ACU.
· Load Satellite:
uploads the satellite information to the ACU.
· Upload to ACU:
uploads the satellite library to ACU.
· Edit Satellite:
edits the satellite information of the selected satellite.
· Add Satellite:
adds the satellite information as defined in the
current settings.
· Delete Satellite:
deletes the selected satellite from the library.
· Save to PC:
saves the current library settings to PC.
NOTE:
It is required to click the "Save to PC" button after "Edit Satellite", “Add Satellite",
or "Delete Satellite" button is clicked.
