7 Tutorial: Milling a Sample Part
7.5 Configuring the Verify Settings
80
In this case, the required dimensions are displayed within the NC program, as shown below.
7.5.
CONFIGURING THE VERIFY SETTINGS
Before you run the verification simulation, you must adjust the verification settings so that the
verification simulation will accurately simulate the tool-workpiece combination you will be using.
This section provides instructions for configuring the Verify Settings.
Outline: Configuring Verify Settings
No.
Step
Section
Page
1
Open the Verify Settings Window.
2
Adjust the view settings.
3
Specify the size of the stock and location of the origin from which measurements
are taken.
Set the position from which the tool must start.
