3 Installing the Hardware and Software
3.3 Installing the Software
25
14.
Wait while installation is performed.
The InstallShield Wizard Complete screen is displayed.
15.
Select
Yes, I want to restart my computer now
.
16.
Click
Finish
.
Your computer will restart and installation will be finalized.
0
.
3.3.3.
Licensing the Software
For details on licensing your software and managing or transferring your license, refer to the Licensing
Help document that can be found in the Books folder of the software installation disk. You can also
access the Licensing Help document by clicking the Help button during software registration.
Note that CNCBase does not require registration. If you have purchased CNCMotion, that software does
require registration.
3.3.4.
Configuring the Software
The installation program automatically configures most software parameters based on the selections
you make during installation.
The Configuration Program can be used to:
Modify selections made during installation.
Configure machine accessories installed.
This section presents instructions for configuring the control software (CNCMotion or CNCBase) on the
computer.
Procedure Outline: Configuring the Software
No.
Step
Section
Page
1
Run the configuration program.
2
Change configuration settings using the configuration program.
